How to Fix “Secure Boot Is Not Enabled” in Battlefield REDSEC

The intense combat of Battlefield REDSEC requires modern PC security standards. If you’re encountering the “Secure Boot is not enabled” error, it means this crucial security feature is disabled in your system’s UEFI/BIOS.

This guide will walk you through the steps to enable it and get you back into the fight.

Understanding the Secure Boot Error

Secure Boot is a security standard that ensures your PC boots only with trusted software. Many modern games, including Battlefield REDSEC, require it to be active to prevent cheating and enhance system integrity. Enabling it involves adjusting a few settings in your motherboard’s firmware.

Step-by-Step Guide to Enable Secure Boot

Important Note: UEFI menus vary by manufacturer (e.g., ASUS, MSI, Gigabyte, Dell, HP). The steps below are a general guide. If your menus look different, consult your motherboard’s manual.

Step 1: Access the UEFI/BIOS Firmware Settings

1. Click the Windows Start Menu and go to Settings > Update & Security > Recovery.

2. Under Advanced startup, click “Restart now”.

3. After your PC restarts to a blue menu, select Troubleshoot > Advanced options > UEFI Firmware Settings.

4. Click “Restart”. Your PC will now boot into the UEFI/BIOS menu.

Step 2: Enable TPM/fTPM (A Prerequisite)

Before enabling Secure Boot, you must ensure your PC’s Trusted Platform Module (TPM) is active.

• Navigate through your UEFI menus (often tabs like Settings, Security, or Advanced).

• Look for an option named:

  • AMD CPU fTPM (for AMD systems)

  • Intel Platform Trust Technology (PTT) (for Intel systems)

  • Security Device Support or simply TPM Device

• Set this option to Enabled.

Step 3: Disable CSM (Legacy Support)

CSM (Compatibility Support Module) allows older operating systems to boot and often blocks Secure Boot.

• Find the Boot tab or section in your UEFI.

• Locate the CSM or Legacy Support option.

• Set it to Disabled.

• Save changes and exit if prompted. Your PC may restart and return to the UEFI. This step is crucial for the “Secure Boot” option to become available.

Step 4: Enable and Configure Secure Boot

1. Return to the Boot or Security tab in your UEFI.

2. Find the Secure Boot option and set it to Enabled.

3. You may need to change the Secure Boot Mode to “Custom” to access key management.

4. Look for and select the option “Restore Factory Keys” or “Load Default Keys”. Confirm Yes when asked.

5. The system should now switch from “Custom” to “Standard” mode automatically. If not, change the Secure Boot Mode back to “Standard”.

6. Finally, navigate to the “Save & Exit” tab and select “Save Changes and Reset”.

Your PC will now restart with Secure Boot enabled. You should be able to launch Battlefield REDSEC without the error.

Troubleshooting Common Issues

• “Secure Boot” Option is Grayed Out? This almost always means CSM is still enabled. Go back to Step 3 and ensure CSM/Legacy Support is fully disabled.

• Can’t Boot into Windows After? You may have changed the wrong settings. Re-enter the UEFI and ensure your boot drive with Windows is selected as the first boot option. If the problem persists, you may need to re-enable CSM temporarily.

• Menus Don’t Match? Search online for “[Your Motherboard/PC Model] enable Secure Boot” for a precise video or guide.

Summary: Enable Secure Boot

1. Access UEFI via Windows Recovery.

2. Enable TPM/fTPM/PTT.

3. Disable CSM/Legacy Support.

4. Enable Secure Boot and Restore Factory Keys.

5. Save & Exit.

By following these steps, you will resolve the security requirement for Battlefield REDSEC and be ready to experience its Battle Royale and Gauntlet modes.